Chinese (Simplified)
Arabic
English
French
German
Italian
Portuguese
Russian
Spanish
- During the use of the Halogen Moisture Analyzer, lightly press the buttons with your fingers, avoid using nails, and it is even more forbidden to use sharp hard objects.
- The cover of the quick halogen moisture analyzer should be lifted and put down gently.
- The minimum sample size must be greater than 0.5 grams.
- When the fast halogen moisture analyzer is in the standby state, it can be used without preheating.
- The fast halogenmoisture analyzer should clean the sample tray before placing the sample, and the sample tray holder should be used at all times to prevent burns from the hot sample tray.
- The last display state of the test will be kept on the screen until the tare key is pressed. The second and subsequent tests should be performed as soon as possible to prevent loss of moisture.
- Before using the Halogen Moisture Analyzer, carefully check whether the power supply voltage meets the requirements of the Halogen Moisture Analyzer, whether the socket and equipment plug are intact, and do not use if damaged. Please turn off the main power switch before leaving get off work or without using the instrument for a long time. If there is no main switch, unplug the power plug and put it next to the instrument.